|
Rear Wing
#353510
Aerodynamic rear wing molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage.
|
|
|
Rear Wing - Black
#353515
Aerodynamic rear wing (black) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage.
|
|
|
Rear Wing - Orange
#353516
Aerodynamic rear wing (orange) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage.
|
|
|
Rear Wing - Pink
#353518
Aerodynamic rear wing (pink) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage.
|
|
|
Rear Wing - Yellow
#353519
Aerodynamic rear wing (yellow) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage.
|
|
|
Composite Rear Wing Shim - Black (2)
#353565
Molded composite rear wing shim for XB and XT series buggies and truggies. Provides additional support to prevent wing from pulling off of mounting screws. Black colour, set of 2.
|
|
|
Wheel Nut With Cover - Hard Coated (2)
#355265
Hardcoated aluminum wheel nut with cover for XB8 wheels. Using these wheel nuts, you will never have problems anymore with dirt getting into the wheel axle assembly! Fits front and rear wheel axles.
|
|
|
Brake/Throttle System Set
#356400
Brake/throttle set includes threaded steel rods, pivot joints, ball joints, adjusting collars, and all necessary hardware.
|
|
|
Alu Fuel Filter Set
#358900
Large capacity aluminum fuel filter set. This fuel filter is different from others as it is captured in a holder and will not turn as the result of vibration.
|
|
|
Composite Fuel Filter Set
#358901
Fuel filter set made from tough composite material and the aluminum cap is machined from premium aluminum. A sieve is installed in the fuel filter. The body of the fuel filter has a slot that enables the filter to sit in the holder perfectly and prevents the filter from turning.
|
|
|
XRAY Body for 1/8 Off Road Buggy - V2
#359701
Redesigned clear Lexan® body for 1/8 off-road buggy (version 2) includes window masks.
The front nose has reinforced edges where it fits around the front shock tower, to reduce body tears. The area around the engine has been specially designed to promote airflow into and around the engine head to assist with engine cooling. The sides of the body have been redesigned to allow the body to closely cover the sides of the car to minimize the amount of dirt entering the chassis (also helps in wet conditions).
|
|
|
XRAY Body for 1/8 Off Road Buggy - Light
#359702
Redesigned clear Lexan® body for 1/8 off-road buggy (light version) includes window masks. This body is manufactured from thinner material, this gives a weight saving of 30% compared to a standard body. For serious racers only.
The front nose has reinforced edges where it fits around the front shock tower to reduce body tears. The area around the engine has been specially designed to promote airflow into and around the engine head to assist with engine cooling. The sides of the body have been redesigned to allow the body to closely cover the sides of the car to minimize the amount of dirt entering the chassis (also helps in wet conditions).
|
|
|
O-Ring 9x1.8 (10)
#970090
Rubber O-ring fits over 9mm shaft. 1.8mm thick. Set of 10 pieces.
|
|
ID |
Product Name |
Released |
353565 |
|
Mar. 26, 2009 |
359702 |
|
Jun. 16, 2006 |
353515 |
|
May 12, 2006 |
353516 |
|
May 12, 2006 |
353518 |
|
May 12, 2006 |
353519 |
|
May 12, 2006 |
359806 |
|
May 12, 2006 |
359808 |
|
May 12, 2006 |
359809 |
|
May 12, 2006 |
358951 |
|
Mar. 24, 2006 |
359701 |
|
Mar. 24, 2006 |
355265 |
|
Jul. 28, 2005 |
358901 |
|
Apr. 21, 2005 |
353510 |
|
Aug. 01, 2004 |
355260 |
|
Aug. 01, 2004 |
356200 |
|
Aug. 01, 2004 |
356400 |
|
Aug. 01, 2004 |
356510 |
|
Aug. 01, 2004 |
358045 |
|
Aug. 01, 2004 |
358810 |
|
Aug. 01, 2004 |
| |
|
|